FixVault
Home › Nissan-Datsun › 2005 › Quest Base › Repair and Diagnosis › Engine Performance › Engine Control System › Basic Service Procedure › Idle Speed and Ignition Timing Check › Ignition Timing › Method A

Method A

  1. Slide the harness protector off ignition coil No. 1 to clear the wires.
  2. Attach timing light to the ignition coil No. 1 wires as shown in the figure.
    Fig 1: Identifying No. 1 Ignition Coil
    G02446730Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Check ignition timing.
    Fig 2: Checking Ignition Timing
    G02446731Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault