FixVault
Home › Nissan-Datsun › 2005 › Quest Base › Repair and Diagnosis › Engine Performance › Engine Control System › DTC P0403: EGR Volume Control Valve › Diagnostic Trouble Codes Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
    2. Fig 1: CONSULT-II Data Monitor Screen Display
    G02474051Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Start engine and warm it up to normal operating temperature.
  3. Rev engine from idle to 2, 000 RPM 10 times.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault