FixVault
Home › Nissan-Datsun › 2005 › Quest Base › Repair and Diagnosis › Engine Performance › Engine Control System › Injector Circuit › Component Inspection › Injector

Component Inspection: Injector

  1. Disconnect injector harness connector.
  2. Check resistance between terminals as shown in the figure.
    • Resistance: 11.1 -14.5Ω [at 10 - 60°C (50 - 140°F)] 
    Fig 1: Checking Resistance Between Terminals
    G02474686Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault