CAN Communication Inspection Using CONSULT-II (Self-Diagnosis)

WARNING: This page is about a different car, the 2005 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

SELF-DIAGNOSTIC RESULT CHECK

NOTE: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.

Connect to CONSULT-II, and select "BCM" on "SELECT SYSTEM" screen.
Select "BCM control unit" on "SELECT WORK ITEM" screen, and select "SELF-DIAG RESULTS".
Check display content in self-diagnostic results.

SELF-DIAGNOSTIC RESULTS

CONSULT-II display code	Diagnosis item
U1000	INITIAL DIAG
U1000	TRANSMIT DIAG
U1000	ECM
U1000	IPDM E/R
U1000	METER/M&A
U1000	I-KEY

Contents displayed

No malfunction: Inspection End
Malfunction in CAN communication system: After printing the monitor items, go to "CAN System". Refer to CAN COMMUNICATION .