FixVault
Home › Nissan-Datsun › 2005 › Quest Base › Repair and Diagnosis › External Pages › Different car › Section 368 (Body Control System) › BCM (Body Control Module) › CONSULT-II (BCM Function) › Work Support › Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2005 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "BCM" on "SELECT TEST ITEM" screen.
    Fig 1: CONSULT-II - Select Test Item Display
    G02421307Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Touch "WORK SUPPORT" on "SELECT DIAG MODE" screen.
  3. Touch item on "SELECT WORK ITEM" screen.
  4. Touch "START".
  5. Touch "CHANGE SET".
  6. The setting will be changed and "RESETTING COMPLETED" will be displayed.
  7. Touch "END".
    Fig 2: CONSULT-II - Select Diag Mode Item Display
    G02421308Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault