Stop Lamp Switch

Disconnect stop lamp switch harness connector.

Fig 1: Identifying Stop Lamp Switch And Brake Pedal
Courtesy of NISSAN MOTOR CO., U.S.A.

Check continuity between stop lamp switch terminals 1 and 2 under the following conditions.

Fig 2: Checking Continuity Between Stop Lamp Switch Terminals 1 And 2

Courtesy of NISSAN MOTOR CO., U.S.A.

BRAKE PEDAL CONDITIONS AND CONTINUITY REFERENCE

Conditions	Continuity
Brake pedal: Fully released	Should not exist.
Brake pedal: Slightly depressed	Should exist.

If NG, adjust brake pedal installation. Refer to BRAKE PEDAL AND BRACKET . Perform step 2 again.