Combination Switch: Replacement

For removal and installation of spiral cable, refer to REMOVAL AND INSTALLATION .

• Each switch can be replaced without removing switch base.
  Fig 1: Removing Switch Base

  Courtesy of NISSAN MOTOR CO., U.S.A.
• To remove switch base, remove switch base attaching screws.
  Fig 2: Removing Switch Base Attaching Screws

  Courtesy of NISSAN MOTOR CO., U.S.A.
• Before installing the steering wheel, align the steering wheel guide pins with the screws which secure the combination switch as shown in the figure.
  Fig 3: Aligning Steering Wheel Guide Pins

  Courtesy of NISSAN MOTOR CO., U.S.A.