Overall Function Check

Use this procedure to check the overall function of the park/neutral position switch circuit. During this check, a 1st trip DTC might not be confirmed.

With GST 

1. Turn ignition switch ON.
2. Check voltage between ECM terminal 102 (PNP switch signal) and ground under the following conditions.
   Fig 1: Checking Voltage Between ECM Connector Terminal 102 (PNP Switch Signal) And Ground

   Courtesy of NISSAN MOTOR CO., U.S.A.
   GEAR POSITION AND VOLTAGE REFERENCE - PNP SWITCH
   
   

   Condition (Gear position)	Voltage (V) (Known-good data)
   P or N position (A/T) Neutral position (M/T)	Approx. 0
   Except above position	Battery voltage

3. If NG, go to "DIAGNOSTIC PROCEDURE ".