FixVault
Home › Nissan-Datsun › 2005 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 15 (Continuously Variable Transmission (CVT)) › DTC P0841 Pressure Sensor Function › DTC Confirmation Procedure › With Consult-III

With Consult-III

WARNING: This page is about a different car, the 2007 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON and select "DATA MONITOR" mode for "TRANSMISSION" with CONSULT-III.
  2. Start engine and maintain the following conditions for at least 12 consecutive seconds.

    VEHICLE SPEED: 40 km/h (25 MPH) More than 

    RANGE: "D" position 

  3. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault