FixVault
Home › Nissan-Datsun › 2005 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 15 (Continuously Variable Transmission (CVT)) › DTC P1723 CVT Speed Sensor Function › DTC Confirmation Procedure › With Consult-III

With Consult-III

WARNING: This page is about a different car, the 2007 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON and select "DATA MONITOR" mode for "TRANSMISSION" with CONSULT-III.
  2. Start engine and maintain the following conditions for at least 5 consecutive seconds.

    VEHICLE SPEED SE: 10 km/h (6 MPH) or more 

    ACC PEDAL OPEN: More than 1.0/8 

    RANGE: "D" position 

    ENG SPEED: 450 rpm or more 

    Driving location: Driving the vehicle uphill (increased engine load) will help maintain the driving conditions required for this test. 

  3. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault