FixVault
Home › Nissan-Datsun › 2005 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 15 (Continuously Variable Transmission (CVT)) › Shift Control System › Adjustment of CVT Position

Adjustment of CVT Position

WARNING: This page is about a different car, the 2007 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Make sure that parking brake is applied before adjustment.
  1. Loosen the control cable nut and place the manual lever in "P" position.
  2. Place selector lever in "P" position.
  3. Temporarily tighten the control cable nut.
    NOTE: Do not move the manual lever. Make sure the manual lever stays in the "P" position.
  4. Tighten the control cable nut.

    Control cable nut: Refer to  "CONTROL CABLE COMPONENTS ".

    CAUTION: Secure the manual lever when tightening nut.
  5. Check the operation of the CVT. Refer to "CHECKING OF CVT POSITION ".
About FixVault