FixVault
Home › Nissan-Datsun › 2005 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 15 (Continuously Variable Transmission (CVT)) › Shift Control System › Removal and Installation › Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Make sure that parking brake is applied before removal and installation.
  1. Place the selector lever in the "P" position.
  2. Remove the IP center assembly. Refer to "INSTRUMENT PANEL ASSEMBLY ".
  3. Disconnect the CVT device harness connector.
  4. Remove the key interlock cable from the control device assembly. Refer to "REMOVAL AND INSTALLATION ".
  5. Remove the control cable from the control device assembly.
  6. Remove the nuts and the control device assembly.
About FixVault