Lighting Switch Signal Inspection
WARNING: This page is about a different car, the 2007 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK BCM INPUT SIGNAL
- Select "BCM" on CONSULT-III.
- With "DATA MONITOR" of "BUZZER", confirm "LIGHT SW 1ST" when the lighting switch is operated.
"LIGHT SW 1ST"
Lighting switch (1st position) : ON
Lighting switch (OFF) : OFF
OK or NG
OK: Lighting switch signal is OK. Return to "SYMPTOM CHART ".
NG: Check the lighting switch. Refer to "COMBINATION SWITCH INSPECTION ".