Method A

WARNING: This page is about a different variant/trim than selected.

Slide the harness protector of ignition coil No. 1 to clear the wires.
Attach timing light to the ignition coil No. 1 wires as shown in Fig 1.

Fig 1: Attaching Timing Light To The Ignition Coil No. 1 Wire
Courtesy of NISSAN MOTOR CO., U.S.A.
Check ignition timing.

Fig 2: Identifying Crankshaft Pulley Timing Marks
Courtesy of NISSAN MOTOR CO., U.S.A.