FixVault
Home › Nissan-Datsun › 2005 › Sentra SE-R › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belts › Front Seat Belt › Removal and Installation

Removal and Installation

  1. Disconnect both battery cables.
  2. Slide the seat all the way forward and tilt the seat back toward the front.
  3. Remove adjuster cover. A 
  4. Remove floor anchor bolt. B 
  5. Remove shoulder anchor bolt. C 
  6. Remove center pillar upper and lower garnish. Refer to SIDE AND FLOOR TRIM for details.
  7. Disconnect front seat belt pre-tensioner connector.
  8. Remove the screw securing front seat belt pre-tensioner retractor, then remove seat belt and seat belt pre-tensioner retractor.
  9. Remove bolts securing seat belt adjuster, then remove seat belt adjuster.
Fig 1: Removing/Installing Front Seat Belt (1 Of 2) With Torque Specifications
G02451775Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 2: Removing/Installing Front Seat Belt (2 Of 2) With Torque Specifications
G02451776Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault