FixVault
Home › Nissan-Datsun › 2005 › Xterra SE, 4WD › Repair and Diagnosis › Engine Performance › System › Engine Control System - System And Component Testing › Fuel Pump Circuit › Component Inspection › Fuel Pump

Fuel Pump

  1. Disconnect "fuel level sensor unit and fuel pump" harness connector.
  2. Check resistance between "fuel level sensor unit and fuel pump" terminals 1 and 3.

    Resistance: Approximately 0.2 - 5.0Ω [at 25°C (77°F)] 

    Fig 1: Checking Resistance Between Terminals 1 And 3
    G03607439Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault