ECM Inspection Table

Specification data are reference values and are measured between each terminal and ground. Pulse signal is measured by CONSULT-II.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECMs transistor. Use a ground other than ECM terminals, such as the ground.

Fig 1: ECM Inspection Reference Values Chart (1 Of 8)

G03606732

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: ECM Inspection Reference Values Chart (2 Of 8)

G03606733

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: ECM Inspection Reference Values Chart (3 Of 8)

G03606734

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: ECM Inspection Reference Values Chart (4 Of 8)

G03606735

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 5: ECM Inspection Reference Values Chart (5 Of 8)

G03606736

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 6: ECM Inspection Reference Values Chart (6 Of 8)

G03606737

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 7: ECM Inspection Reference Values Chart (7 Of 8)

G03606738

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 8: ECM Inspection Reference Values Chart (8 Of 8)

G03606739

Courtesy of NISSAN MOTOR CO., U.S.A.