FixVault
Home › Nissan-Datsun › 2006 › 350Z 2D Convertible, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Control System - DTCS P0643 To P2A03 › DTC P1217 Engine Over Temperature › Overall Function Check › With Consult-II

With Consult-II

  1. Check the coolant level in the reservoir tank and radiator.
    NOTE: Allow engine to cool before checking coolant level.

    If the coolant level in the reservoir tank and/or radiator is below

    the proper range, skip the following steps and go to "DIAGNOSTIC PROCEDURE ".

  2. Confirm whether customer filled the coolant or not. If customer filled the coolant, skip the following steps and go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: Checking Coolant Level
    G04074236Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Turn ignition switch ON.
  4. Perform "COOLING FAN" in "ACTIVE TEST" mode with CONSULT-II.
  5. If the results are NG, go to "DIAGNOSTIC PROCEDURE ".
    Fig 2: CONSULT II Display - Active Test
    G04075097Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault