Diagnostic Procedure

1. Turn ignition switch ON.
2. Connect CONSULT-II and select "DATA MONITOR" mode.
3. Select "LOAD SIGNAL" and check indication under the following conditions.
   INDICATION CONDITION
   
   

   Condition	Indication
   Rear window defogger switch: ON	ON
   Rear window defogger switch: OFF	OFF

   Fig 1: Consult-II DATA MONITOR Display Screen

   Courtesy of NISSAN NORTH AMERICA, INC.

OK or NG 

1. OK : GO TO 2.
2. NG : GO TO  4.

Check "LOAD SIGNAL" indication under the following conditions.

Fig 2: Consult-II DATA MONITOR Display Screen

Courtesy of NISSAN NORTH AMERICA, INC.

OK or NG 

1. OK : GO TO 3.
2. NG : GO TO  5.

With CONSULT-II 

Check "HEATER FAN SW" in "DATA MONITOR" mode with CONSULT-II under the following conditions.

Fig 3: CONSULT-II Display - DATA MONITOR

Courtesy of NISSAN NORTH AMERICA, INC.

OK or NG 

1. OK : INSPECTION END 
2. NG : GO TO  6.

Refer to "REAR WINDOW DEFOGGER ".

1. : INSPECTION END 

Refer to "HEADLAMP (FOR USA) " or "HEADLAMP (FOR CANADA) - DAYTIME LIGHT SYSTEM ".

1. : INSPECTION END 

Refer to "TROUBLE DIAGNOSIS ".

1. : INSPECTION END