Fuse Check

• Check if any of the following fuses for BCM and IPDM E/R are blown.
  COMPONENT PART SIGNAL SPECIFICATION
  
  

  COMPONENT PARTS	TERMINAL NO. (SIGNAL)	AMPERE	FUSE NO.
  BCM	38 (Ignition power supply)	10A	1
  	70 (Battery power supply)	50A	f
  IPDM E/R	5 (Battery power supply)	20A	37
  	6 (Battery power supply)	20A	32

  NOTE: Refer to , "COMPONENT PARTS AND HARNESS CONNECTOR LOCATION ".

OK or NG 

OK: Inspection End.

NG: If fuse is blown, be sure to eliminate cause of problem before installing new fuse, Refer to , "POWER SUPPLY ROUTING CIRCUIT ".