FixVault
Home › Nissan-Datsun › 2006 › Altima SE-R, Automatic › Repair and Diagnosis › Electrical › Gauges › Driver Information System › Warning Chime › Light Warning Chime Does Not Operate

Light Warning Chime Does Not Operate

  1. CHECK WARNING CHIME OPERATION 

    Check key warning chime and seat belt warning chime functions.

    Do key warning chime and seat belt warning chime sound? 

    YES: GO TO 2.

    NO: Go to , "ALL WARNINGS ARE NOT OPERATED " or , "KEY WARNING CHIME AND LIGHT WARNING CHIME DOES NOT OPERATE (SEAT BELT WARNING CHIME DOES OPERATE) ".

  2. DATA MONITOR INSPECTION 

    With "BUZZER" on the data monitor, confirm "LIGHT SW 1ST" turns ON/OFF when lighting switch and front fog switch are operated.

    SWITCH OPERATION AND CONSULT-II DISPLAY

    Switch operation CONSULT-II display Operation status
    Headlamp switch (1st position) LIGHT SW 1ST ON
    Headlamp switch (OFF) OFF
    Fig 1: CONSULT-II DATA MONITOR Screen
    G04171173Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: Replace BCM. Refer to , "REMOVAL AND INSTALLATION OF BCM ".

    NG: GO TO 3.

  3. INSPECTION BETWEEN COMBINATION SWITCH AND BCM 

    Select "BCM" on CONSULT-II, and perform BCM self-diagnosis.

    Self-diagnostic results content 

    No malfunction detected: Replace BCM. Refer to , "REMOVAL AND INSTALLATION OF BCM ".

    CAN communication or CAN communication system: Check BCM CAN communication system. Go to , "CAN COMMUNICATION ".

    Diagnosis 1 - 5 systems open circuit: Malfunction in combination switch system. Go to , "COMBINATION SWITCH READING FUNCTION " according to self-diagnostic results.

About FixVault