FixVault
Home › Nissan-Datsun › 2006 › Altima SE-R, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Control System - DTCS P0443 To P0643 (VQ35DE) › DTC P0550 PSP Sensor › Component Inspection › Power Steering Pressure Sensor

Power Steering Pressure Sensor

  1. Reconnect all harness connectors disconnected.
  2. Start engine and let it idle.
  3. Check voltage between ECM terminal 12 and ground under the following conditions.
    Fig 1: Checking Voltage Between ECM Terminal 12 And Ground
    G04167384Courtesy of NISSAN MOTOR CO., U.S.A.
    VOLTAGE SPECIFICATION

    Condition Voltage
    Steering wheel: Being turned. 0.5 - 4.5V
    Steering wheel: Not being turned. 0.4 - 0.8V
About FixVault