FixVault
Home › Nissan-Datsun › 2006 › Altima SE-R, Automatic › Repair and Diagnosis › External Pages › Different car › Section 182 (Lighting System) › Combination Switch › CONSULT-II Function (BCM) › Data Monitor › Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2005 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "COMB SW" on "SELECT TEST ITEM" screen.
  2. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
  3. Touch either "ALL SIGNAL" or "SELECTION FROM MENU" on "SELECT MONITOR ITEM" screen.
    DATA MONITOR

    ALL SIGNALS Monitors all the signals.
    SELECTION FROM MENU Selects and monitors individual signal.
  4. Touch "START".
  5. When "SELECTION FROM MENU" is selected, touch items to be monitored. When "ALL SIGNAL" is selected, all the signals will be monitored.
  6. Touch "RECORD" while monitoring, then the status of the monitored item can be recorded. To stop recording, touch "STOP".
About FixVault