FixVault
Home › Nissan-Datsun › 2006 › Maxima SE, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Control System - Components Diagnosis And Specifications (SDS) › Ignition Signal › Component Inspection › Condenser-2

Component Inspection: Condenser-2

  1. Turn ignition switch OFF.
  2. Disconnect condenser-2 harness connector.
  3. Check resistance between condenser terminals 1 and 2.
    Fig 1: Checking Resistance Between Connector Terminals
    G04075318Courtesy of NISSAN MOTOR CO., U.S.A.
    RESISTANCE REFERENCE

    Resistance Above 1 MΩ at 25°C (77°F)
About FixVault