Automatic Operation

AUTOMATIC OPERATION DESCRIPTION

Function		Description
Memory operation		The front seat LH, steering wheel and door mirrors move to the stored driving position by pushing seat memory switch (1 or 2).
Entry/Exiting function (A/T models only)	Exiting operation	At exit, the front seat LH moves backward and the steering wheel raises. (Exiting position)
Entry/Exiting function (A/T models only)	Entry operation	At entry, the front seat LH and steering wheel will move from the exiting position to the previous driving position before the exiting operation.
Keyfob interlock operation		Perform memory operation, exiting operation and entry operation by pressing keyfob unlock button.
NOTE: Disconnecting the battery erases the stored memory. After connecting the battery, insert the key into the ignition cylinder and turn the driver door switch ON (open) --> OFF (close) --> ON (open), the Entry/Exiting operation becomes possible. After exiting operation is carried out, entry operation can be operated.

AUTO OPERATION STOPS CONDITION

Auto operation temporary stop conditions.

When ignition switch turns to START during seat memory switch operation and entry operation, seat memory switch operation and entry operation is stopped.

Auto operation stop conditions.

When the vehicle speed becomes 7 km/h (4 MPH) or higher. (seat memory switch operation and entry operation).
When the setting switch, memory switch 1 or 2 are pressed.
When A/T selector lever is in any position other than P (A/T models).
When the parking brake switch is in the OFF position (M/T models).
When the door mirror remote control switch is operated (when ignition switch turned ON).
When power seat switch LH turned operated.
When door mirror operates.
When front seat LH sliding Entry/Exiting setting is OFF (entry/exiting operation).

NOTE: During automatic operation, if the ignition switch is turned ON --> START, the automatic operation is suspended. When the ignition switch returns to ON, it resumes.