FixVault
Home › Nissan-Datsun › 2006 › Maxima SL › Repair and Diagnosis › Engine Performance › System › Engine Control System - DTCS P0447 To P1168 › DTC P0451 EVAP Control System Pressure Sensor › DTC Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch OFF and wait at least 10 seconds.
  2. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and wait at least 40 seconds.
    NOTE: Do not depress accelerator pedal even slightly.
    If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "
    Fig 1: Consult-II DATA MONITOR Display Screen
    G04074999Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault