FixVault
Home › Nissan-Datsun › 2006 › Maxima SL › Repair and Diagnosis › Engine Performance › System › Engine Control System - DTCS P1211 To P2A03 › DTC P2135 TP Sensor › DTC Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for 1 second.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
Fig 1: Consult-II DATA MONITOR Display Screen
G04080353Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault