FixVault
Home › Nissan-Datsun › 2006 › Pathfinder SE, RWD › Repair and Diagnosis › Engine Performance › Testing & Diagnosis › Engine Control System - System And Component Testing › ASCD Brake Switch › Component Inspection › ASCD Brake Switch

ASCD Brake Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD brake switch harness connector.
  3. Check harness continuity between ASCD brake switch terminals 1 and 2 under the following conditions.
    ASCD BRAKE SWITCH CONTINUITY

    Condition Continuity
    When brake pedal: Fully released. Should exist.
    When brake pedal: Slightly depressed. Should not exist.

    If NG, adjust ASCD brake switch installation, refer to "BRAKE PEDAL ", and perform step  3 again.

    Fig 1: Checking Continuity Between Terminals No. 1 & 2
    G04101963Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault