Diagnostic Procedure
- INSPECTION START
Erase (1st trip) DTCs. Refer to , "HOW TO ERASE EMISSION-RELATED DIAGNOSTIC INFORMATION ".
: GO TO 2.
- CHECK GROUND TERMINALS
Check ground terminals for corroding or loose connection. Refer to , "GROUND INSPECTION "
OK or NG
OK : GO TO 3.
NG : Repair or replace.
- SEARCH FOR ELECTRICAL INCIDENT
Perform , "HOW TO PERFORM EFFICIENT DIAGNOSIS FOR AN ELECTRICAL INCIDENT ", "INCIDENT SIMULATION TESTS ".
OK or NG
OK : GO TO 4.
NG : Repair or replace.
- CHECK CONNECTOR TERMINALS
Refer to , "HOW TO CHECK TERMINAL ", "HOW TO PROBE CONNECTORS", "How to Check Enlarged Contact Spring of Terminal".
OK or NG
OK : INSPECTION END
NG : Repair or replace connector.