FixVault
Home › Nissan-Datsun › 2006 › Sentra SE-R Spec V › Repair and Diagnosis › Drivelines & Axles › Wheel Hubs › Front Axle › Drive Shaft › Disassembly › Support Bearing

Support Bearing

  1. Remove dust shield.
    Fig 1: Removing Dust Shield
    G04194460Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Remove snap ring.
    Fig 2: Removing Snap Ring
    G04194461Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Press support bearing assembly off drive shaft.
    Fig 3: Pressing Support Bearing Assembly Off Drive Shaft
    G04194462Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Remove snap ring.
  5. Remove dust shield.
  6. Separate support bearing from retainer.
    Fig 4: Removing Dust Shield
    G04194463Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault