Hazard and Horn Reminder
Power is supplied at all times:
- to remote keyless entry relay terminals 1, 3 and 6
- through 15A fuse [No. 5, located in the fuse block (J/B)], and
- to horn relay terminals 1 and 5
- through 10A fuse (No. 33, located in the fuse and fusible link box).
When smart entrance control unit receives LOCK or UNLOCK signal from keyfob, ground is supplied:
- to remote keyless entry relay terminal 2
- through smart entrance control unit terminal 7, and
- to horn relay terminal 2
- through smart entrance control unit terminal 19.
Remote keyless entry relay and horn relay are now energized, and hazard warning lamp flashes and horn sounds as a reminder.
The hazard and horn reminder has C mode (horn chirp mode) and S mode (non-horn chirp mode).
Operating function of hazard and horn reminder
OPERATING FUNCTION OF HAZARD AND HORN REMINDER
| C mode (Horn chirp mode) | S mode (Non-horn chirp mode) | |||
|---|---|---|---|---|
| Hazard warning lamp flash | Horn sound | Hazard warning lamp flash | Horn sound | |
| Lock | Twice | Once | Twice | - |
| Unlock | Once | - | - | - |
How to change hazard and horn reminder mode
With CONSULT-II
Hazard and horn reminder can be changed using "WORK SUPPORT" mode in "MULTI REMOTE ENT".
Without CONSULT-II
Refer to Owner's Manual for instructions.