FixVault
Home › Nissan-Datsun › 2006 › Sentra SE-R › Repair and Diagnosis › Engine Performance › System › Engine Control System - Component Testing (Qr25DE) › VIAS › Component Inspection › VIAS Control Solenoid Valve › With CONSULT-II

With CONSULT-II

  1. Reconnect harness connectors disconnected.
  2. Turn ignition switch ON.
  3. Perform "VIAS SOL VALVE" in "ACTIVE TEST" mode.
    4. Fig 1: CONSULT II Display - Active Test For Energizing VIAS Solenoid Valve
    G04148504Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Check air passage continuity and operation delay time under the following conditions.
VIAS SOL VALVE CONDITION & CONTINUITY SPECIFICATION

Condition
VIAS SOL VALVE		 Air passage continuity between A  and B  Air passage continuity between A  and C 
ON Yes No
OFF No Yes

Operation takes less than 1 second. 

About FixVault