FixVault
Home › Nissan-Datsun › 2006 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 147 (Engine Control System - Introduction (Qr25DE)) › Basic Service Procedure › Idle Speed and Ignition Timing Check › Ignition Timing › Method A

Method A

WARNING: This page is about a different car, the 2005 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Slide the harness protector off the ignition coil No. 1 to clear the wires.
  2. Attach timing light to the ignition coil No. 1 wires as shown in Fig 1.
    Fig 1: Attaching Timing Light To Ignition Coil No. 1 Wires
    G02450673Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Check ignition timing.
About FixVault