Brake Hydraulic Line: Installation

WARNING: This page is about a different car, the 2005 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

Tighten all flare nuts and connecting bolts.
- Specification
- Flare nut: 15 - 18 N.m (1.5 - 1.8 kg-m, 11 - 13 ft-lb)
- Connecting bolt: 17 - 20 N.m (1.7 - 2.0 kg-m, 12 - 14 ft-lb)
Refill until new brake fluid comes out of each air bleeder valve.
CAUTION:
- Refill with new brake fluid "DOT 3".
- Never reuse drained brake fluid.
Fig 1: Tightening Brake Tube Flare Nuts & Connecting Bolts
Courtesy of NISSAN MOTOR CO., U.S.A.
Bleed air from brake system. Refer to BLEEDING BRAKE SYSTEM .