Master Cylinder: Disassembly

WARNING: This page is about a different car, the 2005 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

Bend claws of stopper cap outward and remove stopper cap.

Fig 1: Removing Stopper Cap
Courtesy of NISSAN MOTOR CO., U.S.A.
Drive out spring pin from cylinder body (with ABS).

Fig 2: Removing Spring Pin From Cylinder Body
Courtesy of NISSAN MOTOR CO., U.S.A.
Draw out reservoir tank and seals.
Remove piston stopper pin while piston is pushed into cylinder (with ABS).

Fig 3: Removing Piston Stopper Pin
Courtesy of NISSAN MOTOR CO., U.S.A.
Remove piston assemblies.
- If it is difficult to remove secondary piston assembly, gradually apply compressed air through fluid outlet.