FixVault
Home › Nissan-Datsun › 2006 › Sentra SE-R › Repair and Diagnosis › External Pages › Different car › Section 99 (Brake Control System) › Service Information › Trouble Diagnoses For Symptoms › ABS Works Frequently › Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2009 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK WARNING LAMP ACTIVATION

    Make sure warning lamp remains off while driving.

    OK or NG 

    OK: GO TO 2.

    NG: Carry out self-diagnosis. Refer to "CONSULT-III FUNCTION (ABS) ".

  2. CHECK WHEEL SENSORS

    Check the following.

    • Wheel sensor mounting for looseness
    • Wheel sensors for physical damage
    • Wheel sensor connectors for terminal damage or loose connections
    • Sensor rotor and mount for physical damage

    OK or NG 

    OK: GO TO 3.

    NG: Repair or replace as necessary.

  3. CHECK WHEEL BEARINGS

    Check wheel bearing axial end play. Refer to "ON-VEHICLE INSPECTION AND SERVICE " or "ON-VEHICLE INSPECTION AND SERVICE ".

    OK or NG 

    OK: GO TO 4.

    NG: Repair as necessary.

  4. CHECK BRAKE FLUID PRESSURE

    Check brake fluid pressure distribution.

    Is brake fluid pressure distribution normal? 

    YES: Inspection End.

    NO: Perform Basic Inspection. Refer to "BASIC INSPECTION ".

About FixVault