ASCD Clutch Switch (M/T Models)

WARNING: This page is about a different car, the 2006 Nissan 350Z. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF.
Disconnect ASCD clutch switch harness connector.

Check continuity between ASCD clutch switch terminals 3 and 4 under the following conditions.

CONTINUITY REFERENCE

Condition	Continuity
Clutch pedal: Fully released	Should exist
Clutch pedal: Slightly depressed	Should not exist

Fig 1: Checking Continuity Between Harness Connector terminals 1 And 2

Courtesy of NISSAN NORTH AMERICA, INC.

If NG, adjust ASCD clutch switch installation, Refer to "CLUTCH PEDAL ", and perform step 3 again.