FixVault
Home › Nissan-Datsun › 2007 › Altima Base › Repair and Diagnosis › Body & Frame › Windows › Power Window Control System (Except Hybrid) › LH Only Window Anti-Pinch › Basic Inspection › Diagnosis And Repair Workflow › Work Flow › Detailed Flow

Detailed Flow

  1. INTERVIEW FOR MALFUNCTION

    Interview the symptom to the customer.

    : GO TO 2.

  2. SYMPTOM CHECK

    Check the symptom from the customer's information.

    : GO TO 3.

  3. BASIC INSPECTION

    Check the operation of each part. Check that any symptom occurs other than the interviewed symptom.

    : GO TO 4.

  4. SELF-DIAGNOSIS WITH CONSULT-III

    Perform the self-diagnosis with CONSULT-III. Check that any DTC is detected.

    Is any DTC detected? 

    YES: GO TO 5.

    NO: GO TO  6.

  5. TROUBLE DIAGNOSIS BY DTC

    Perform the trouble diagnosis for the detected DTC. Specify the malfunctioning part.

    : GO TO  9.

  6. FAIL-SAFE ACTIVATION CHECK

    Check that the symptom is applied to the fail-safe activation.

    Does the fail-safe activate? 

    YES: GO TO 7.

    NO: GO TO  8.

  7. SYSTEM DIAGNOSIS

    Perform the system diagnosis for the system that the fail-safe activates. Specify the malfunctioning part.

    : GO TO  9.

  8. SYMPTOM DIAGNOSIS

    Perform the symptom diagnosis. Specify the malfunctioning part.

    : GO TO 9.

  9. MALFUNCTION PART REPAIR

    Repair or replace the malfunctioning part.

    : GO TO 10.

  10. REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT-III)

    Perform the self-diagnosis with CONSULT-III. Check that any DTC is not detected. Erase DTC if DTC is detected before the repair. Check that DTC is not detected again.

    Is any DTC detected? 

    YES: GO TO  5.

    NO: GO TO 11.

  11. REPAIR CHECK (OPERATION CHECK)

    Check the operation of each part.

    Does it operate normally? 

    YES: Inspection End.

    NO: GO TO  3.

About FixVault