Chassis Dynamometer Precaution

WARNING: This page is about a different car, the 2008 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.

When checking with chassis dynamometer, place CONSULT-III in "INSPECTION MODE" to deactivate VDC and TCS. Refer to "MODE 1 : DIAGNOSIS DESCRIPTION " (MODE 1), "MODE 2 : DIAGNOSIS DESCRIPTION " (MODE 2).

NOTE: The vehicle may move unexpectedly out of the dynamometer because of TCS and VDC operations.

CAUTION:

Make sure that the brake control warning, master caution indicator lamps blink and "CHECK VDC SYSTEM" is displayed on the multi information display (Test Mode is achieved).
Secure the vehicle with the lock chain for safety.