Select Cable Adjustment

Remove the select cable eye end (1) from the select lever (2) of the control device.
Slide the lock (A) on the select cable eye end (1) away from the cable end.
Turn the select cable eye end (1) over and push the stopper (B) to release the adjustment.

Fig 1: Identifying Cable Eye End, Select Lever And Control Device
Install the select cable eye end (1) to the select lever (2) of the control device

Fig 2: Identifying Cable Eye End, Select Lever And Control Device
Hold the shift lever with the gap between the reverse gate stopper and the shifter base at the specified distance (A).
Distance "A": 6.3 - 7.0 mm (0.25 - 0.28 in)

Fig 3: Identifying Gap Between Reverse Gate Stopper And Shifter Base
Push the stopper (B) into the cable eye end housing (1).
Slide the lock (A) over the stopper (B).
Check for smooth gear select operation.

Fig 4: Identifying Stopper Into Cable Eye End Housing