Terminals and Reference Values for Automatic Drive Positioner Control Unit
TERMINALS AND REFERENCE VALUES FOR AUTOMATIC DRIVE POSITIONER CONTROL UNIT
| Terminal | Wire Color | Item | Condition | Voltage (V) (Approx.) |
|---|---|---|---|---|
| 1 | Y/G | Tilt switch signal UP | UP operation | 0 |
| Other than above | 5 | |||
| 2 | LG/R | Changeover switch signal RH | RH position | 0 |
| Other than above | 5 | |||
| 3 | Y/B | Mirror switch signal UP | UP position | 0 |
| Other than above | 5 | |||
| 4 | V/W | Mirror switch signal LEFT | LEFT position | 0 |
| Other than above | 5 | |||
| 5 | R/B | Mirror sensor signal RH VERTICAL | Door mirror RH UP or DOWN operation | Changes between 3.4 and 0.6 |
| 6 | L/Y | Mirror sensor signal LH VERTICAL | Door mirror LH UP or DOWN operation | Changes between 3.4 and 0.6 |
| 7 | O/L | Tilt sensor input | Tilt position TOP | 1 |
| Tilt position BOTTOM | 4 | |||
| 9 | L/W | Power seat memory switch 1 signal | Memory switch 1 ON | 0 |
| Memory switch 1 OFF | 5 | |||
| 10 | R | UART LINE (TX) | - | - |
| 11 | P/L | Telescopic switch signal FORWARD | FORWARD operation | 0 |
| Other than above | 5 | |||
| 12 | O | Power seat memory switch indicator 1 signal | Memory switch 1 ON | 1 |
| Memory switch 1 OFF | Battery voltage | |||
| 13 | P | Power seat memory switch indicator 2 signal | Memory switch 2 ON | 1 |
| Memory switch 2 OFF | Battery voltage | |||
| 14 | GR/R | Mirror motor signal RH UP | UP operation | 1.7 - Battery voltage |
| Other than above | 0 | |||
| 15 | L/Y | Mirror motor signal RH LEFT | LEFT operation | 1.7 - Battery voltage |
| Other than above | 0 | |||
| 16 | G/B | Mirror motor signal LH DOWN | DOWN operation | 1.7 - Battery voltage |
| Other than above | 0 | |||
| Mirror motor signal LH RIGHT | RIGHT operation | 1.7 - Battery voltage | ||
| Other than above | 0 | |||
| 17 | LG/B | Tilt switch signal DOWN | DOWN operation | 0 |
| Other than above | 5 | |||
| 18 | L | Changeover switch signal LH | LH position | 0 |
| Other than above | 5 | |||
| 19 | L/B | Mirror switch signal DOWN | DOWN position | 0 |
| Other than above | 5 | |||
| 20 | BR/Y | Mirror switch signal RIGHT | RIGHT position | 0 |
| Other than above | 5 | |||
| 21 | L/W | Mirror sensor signal RH HORIZONTAL | Door mirror RH LEFT or RIGHT operation | Changes between 3.4 and 0.6 |
| 22 | G/R | Mirror sensor signal LH HORIZONTAL | Door mirror LH LEFT or RIGHT operation | Changes between 3.4 and 0.6 |
| 23 | R/Y | Telescopic sensor input | Telescopic position TOP | 0.4 |
| Telescopic position BOTTOM | 4.6 | |||
| 24 | R/B | Power seat set switch signal | Set switch ON | 0 |
| Set switch OFF | 5 | |||
| 25 | V | Power seat memory switch 2 signal | Memory switch 2 ON | 0 |
| Memory switch 2 OFF | 5 | |||
| 26 | R/W | UART LINE (RX) | - | - |
| 27 | G/W | Telescopic switch signal BACKWARD | BACKWARD operation | 0 |
| Other than above | 5 | |||
| 30 | L/R | Mirror motor signal RH DOWN | DOWN operation | 1.7 - Battery voltage |
| Other than above | 0 | |||
| Mirror motor signal RH RIGHT | RIGHT operation | 1.7 - Battery voltage | ||
| Other than above | 0 | |||
| 31 | V/R | Mirror motor signal LH UP | UP operation | 1.7 - Battery voltage |
| Other than above | 0 | |||
| 32 | BR | Mirror motor signal LH LEFT | LEFT operation | 1.7 - Battery voltage |
| Other than above | 0 | |||
| 33 | W/L | Sensor power supply | - | 5 |
| 34 | W | Battery power supply (FUSE) | - | Battery voltage |
| 35 | G/Y | Tilt motor signal UP | UP operation | Battery voltage |
| Other than above | 0 | |||
| 36 | R | Telescopic motor signal FORWARD | FORWARD operation | Battery voltage |
| Other than above | 0 | |||
| 39 | W/R | Battery power supply (PTC) | - | Battery voltage |
| 40 | B | Ground | - | 0 |
| 41 | Y/G | Sensor ground | - | 0 |
| 42 | G/W | Tilt motor DOWN signal | DOWN operation | Battery voltage |
| Other than above | 0 | |||
| 44 | G | Telescopic motor signal BACKWARD | BACKWARD operation | Battery voltage |
| Other than above | 0 | |||
| 48 | B | Ground | - | 0 |