Procedure For Malfunction B

With CONSULT-II 

1. Turn ignition switch ON and wait at least 1 second.
2. Select "DATA MONITOR" mode with CONSULT-II.
3. Turn ignition switch OFF, wait at least 10 seconds, and then turn ON.
4. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "
   Fig 1: CONSULT-II Display - Data Monitor

   Courtesy of NISSAN MOTOR CO., U.S.A.

WITH GST 

Follow the procedure "With CONSULT-II" above.

PROCEDURE FOR MALFUNCTION C 

With CONSULT-II 

1. Turn ignition switch ON and wait at least 1 second.
2. Select "DATA MONITOR" mode with CONSULT-II.
3. Turn ignition switch OFF, wait at least 10 seconds, and then turn ON.
4. Repeat step  3 for 32 times
5. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "
   Fig 2: CONSULT-II Display - Data Monitor

   Courtesy of NISSAN MOTOR CO., U.S.A.

WITH GST 

Follow the procedure "With CONSULT-II" above.