CAN Communication Inspection Using CONSULT-II (Self-Diagnosis)
WARNING: This page is about a different car, the 2006 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- SELF-DIAGNOSTIC RESULT CHECK CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carries out CAN communication.
- Connect to CONSULT-II, and select "BCM" on "SELECT SYSTEM" screen.
- Select "BCM" on "SELECT TEST ITEM" screen, and select "SELF-DIAG RESULTS".
- Check display content in self-diagnostic results.
CONSULT II DISPLAY CODE AND DIAGNOSIS ITEM
| CONSULT-II display code | Diagnosis item |
|---|---|
| U1000 | INITIAL DIAG |
| TRANSMIT DIAG | |
| ECM | |
| IPDM E/R | |
| METER/M&A | |
| I-KEY |
Contents displayed
No malfunction: Inspection End
Malfunction in CAN communication system: After printing the monitor items, go to "CAN COMMUNICATION ".