Inspection Procedure
- CHECK SELF-DIAGNOSIS RESULT
Check self-diagnostic results.
SELF-DIAGNOSTIC RESULTS REFERENCESelf-diagnosis results G-SENSOR Is above displayed in the self-diagnosis display?
Yes: GO TO 2.
NO: INSPECTION END
- CHECK G SENSOR
Use "Data Monitor" to check if the G sensor are normal.
G SENSOR CHECKVehicle status G sensor (Data monitor standard) When stopped -0.11 G to +0.11 G Speed up Negative value OK or NG
OK: INSPECTION END
NG: Replace ABS actuator and electric unit (control unit) and then perform ABS actuator and electric unit (control unit) self-diagnosis again.