FixVault
Home › Nissan-Datsun › 2007 › Pathfinder LE, 4WD › Repair and Diagnosis › Engine Performance › System › Engine Control System - DTCS P0455 To P1421 › DTC P1225 TP Sensor › DTC Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
    Fig 1: Identifying CONSULT-II Display - DATA MONITOR
    G04900036Courtesy of NISSAN NORTH AMERICA, INC.
  3. Turn ignition switch OFF and wait at least 10 seconds.
  4. Turn ignition switch ON.
  5. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault