FixVault
Home › Nissan-Datsun › 2007 › Pathfinder LE, 4WD › Repair and Diagnosis › Engine Performance › System › Engine Control System - Introduction › Basic Service Procedure › Fuel Pressure Check › Fuel Pressure Release › Without CONSULT-II

Without CONSULT-II

  1. Remove fuel pump fuse located in IPDM E/R.
    Fig 1: Identifying Fuel Pump Fuse
    G04894170Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Start engine.
  3. After engine stalls, crank it two or three times to release all fuel pressure.
  4. Turn ignition switch OFF.
  5. Reinstall fuel pump fuse after servicing fuel system.
About FixVault