FixVault
Home › Nissan-Datsun › 2007 › Quest Base › Repair and Diagnosis › Engine Performance › System › Engine Control System - Component Testing › Ignition Signal › Component Inspection › Condenser-1

Component Inspection: Condenser-1

  1. Turn ignition switch OFF.
  2. Disconnect condenser-1 harness connector.
  3. Check resistance between condenser-1 terminals + and -.

    Resistance: Above 1 MΩ [at 25°C (77°F)] 

    Fig 1: Checking Resistance Between Condenser-1 Terminals + And -
    G04905883Courtesy of NISSAN NORTH AMERICA, INC.
About FixVault