FixVault
Home › Nissan-Datsun › 2007 › Quest Base › Repair and Diagnosis › Engine Performance › System › Engine Control System - DTCS P1211 To P2A03 › DTC P1226 TP Sensor › DTC Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Turn ignition switch OFF and wait at least 10 seconds.
  4. Turn ignition switch ON.
  5. Repeat step  3 to  4 for 32 times.
  6. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault