Diagnostic Procedure

With CONSULT-II 

1. Turn ignition switch "ON". (Do not start engine.)
2. Select "SELF-DIAG RESULTS" mode for "TRANSMISSION" with CONSULT-II.
3. Touch "ERASE".
4. Turn ignition switch "OFF" and wait at least 10 seconds.
5. Perform DTC confirmation procedure, "DTC CONFIRMATION PROCEDURE ".

Is the "TCM PROCESSOR" displayed again? 

YES: Replace TCM.

NO: INSPECTION END 

Fig 1: CONSULT-II Function Screen Display - Select System

Courtesy of NISSAN MOTOR CO., U.S.A.