FixVault
Home › Nissan-Datsun › 2007 › Sentra SE-R › Repair and Diagnosis (Single Page) › External Pages › Different car › Section 85 (Engine Control System - Introduction (Qr25DE)) › Basic Service Procedure › Idle Speed and Ignition Timing Check › Ignition Timing › Method A

Method A

WARNING: This page is about a different car, the 2006 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Slide the harness protector off the ignition coil No. 1 to clear the wires.
  2. Attach timing light to the ignition coil No. 1 wires as shown in the figure.
  3. Check ignition timing.
    Fig 1: Attaching Timing Light To Ignition Coil No. 1 Wires
    G04191591Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault